Hot Washing PET Plastic Recycling Line for Round Flat Bottles 500-1000kg/h Project Overview This line introduces a powerful "two-stage hot wash" process, which effectively removes stubborn oils, adhesives, and organic residues. This results in significantly higher cleanliness levels compared to cold wash systems, qualifying the output for more demanding applications.Designed to handle both round and flattened PET bottles at 500-1000 kg/H, this line incorporates a "hot wash"

3A Grade rePET Bottle Brick Plastic Recycling Hot Washing Line Plastic Bottle to Bottle Project Overview The PET (Polyethylene Terephthalate) recycling system represents one of the most competitive segments within the plastic recycling market.This production line is specifically designed for the recycling and reuse of discarded PET plastic bottles, such as mineral water bottles, beverage bottles, and cola bottles, from daily life. Drawing on years of practical experience in

Cold Washing PET Plastic Recycling Line for Round Bottles 500-1000kg/h Project Overview This cold washing line is configured for processing whole, round PET bottles with a small scale capacity of 500-1000 kg/H. It employs a basic "cold wash" process, making it a cost-effective solution for producing primary recycled material. The output is typically suited for manufacturing low-end chemical fibers or plastic strapping.While ensuring the quality of the equipment and the

Plastic Sheet Grade PET Bottle Bricks Hot Washing Recycling Line Large Capacity Machine Project Overview Our Plastic Sheet-Grade PET Bottle rPET Plastic Recycling Washing Line is engineered to transform post-consumer PET bottles—such as mineral water, beverage, and soda bottles—into high-quality recycled PET (rPET) flakes suitable for sheet-grade applications. Designed with efficiency and sustainability in mind, this line integrates advanced pretreatment, washing, purificatio

Chemical Fiber Grade PET Plastic Recycling Hot Washing Line 2000-3000kg/h Project Overview Optimized for the high-volume production (2000-3000 kg/H) of fiber-grade PET, this line focuses on efficiently removing contaminants that hinder the spinning process. It produces clean flakes that are subsequently sent for Solid-State Polycondensation (SSP) to achieve the necessary viscosity for melt spinning into polyester staple fiber or filament. Process Introduction The process